Categorii

Camere de termoviziune

Teledyne FLIR A615 Camera de termoviziune pentru monitorizare proces

Garantia oferita este conform cu cea oferita de producator

FLIR A615

Cameră de termoviziune pentru monitorizare proces

Model: A615, FOV 15°

FLIR A615 este o cameră de termoviziune compactă, accesibilă și ușor de controlat pentru monitorizarea stării, controlul procesului/asigurarea calității și prevenirea incendiilor. Această cameră poate fi controlată complet de un computer și este Plug and Play cu software de viziune artificială de la terți, cum ar fi National Instruments, Cognex, Matrox, MVtec și Stemmer Imaging.

CALITATE EXCELENTĂ A IMAGINII

FLIR A615 dispune de un microbolometru de 640 x 480 pixeli care detectează diferențe de temperatură de până la 50 mK, pentru precizie la distanțe mai lungi.

16-BIȚI TEMPERATURĂ IEȘIRE LINEARĂ

Măsurați temperaturile în modul fără contact folosind orice software terță parte datorită ieșirii liniare a temperaturii pe 16 biți.

STREAMING CU FRECVENȚĂ RIDICATA

Transmiteți în flux imagini full-frame pe 16 biți la 50 Hz sau în modul ferestre de până la 200 Hz, pentru procese de mare viteză.

SPECIFICATIONS

Digital I/O connector type: 6-pole jackable screw terminal

Digital Inputs: 2 opto-isolated, 10–30 VDC

Digital Output Purpose: Output to ext. device (programmatically set)

Digital Outputs: 2 opto-isolated, 10–30 VDC, max 100 mA

EMC: EN 61000-6-2:2001 (Immunity), EN 61000-6-3:2001 (Emission), FCC 47 CFR Part 15 Class B (Emission)

f-number: 1.0

Image Frequency: 50 Hz (100/200 Hz with windowing)

Thermal Sensitivity/NETD: < 0.05°C @ +30°C (86°F) / 50 mK

Accuracy: ±2°C or ±2% of reading

COMMUNICATION & DATA STORAGE

Digital I/O connector type: 6-pole jackable screw terminal

Digital I/O isolation voltage: 500 VRMS

Digital I/O supply voltage: 12/24 VDC, max 200 mA

Digital input purpose: Image tag (start, stop, general), Image flow ctrl. (Stream on/off), Input ext. device (programmatically read)

Digital Inputs: 2 opto-isolated, 10–30 VDC

Digital Output Purpose: Output to ext. device (programmatically set)

Digital Outputs: 2 opto-isolated, 10–30 VDC, max 100 mA

Ethernet: Control and image

Ethernet Communication: TCP/IP socket-based FLIR proprietary and GenICam protocol

Ethernet Connector Type: RJ-45

Ethernet Image Streaming: 16-bit 640 × 480 pixels at 50 Hz, 16-bit 640 × 240 pixels at 100 Hz, 16-bit 640 × 120 pixels at 200 Hz (Signal linear, Temperature linear, Radiometric GigE Vision and GenICam compatible)

Ethernet Protocols: TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP

Ethernet Standard: IEEE 802.3

Ethernet Type: Gigabit Ethernet

USB: Control and image

USB - Communication: TCP/IP socket-based FLIR proprietary

USB - Connector Type: USB Mini-B

USB - Image Streaming: 16-bit 640 × 480

USB - Protocols: TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP

USB - Standard: USB 2 HS

IMAGING & OPTICAL

Camera size excl lens (L x W x H): 203 × 73 × 75 mm (8.0 × 2.9 × 3.0 in.)

Detector Pitch: 17 µm

Detector Time Constant: Typical 8 ms

Field of view (FOV): 15° × 11° (19° diagonal)

FLIR Screen-EST Mode: No

f-number: 1.0

Focal Length: 41.3 mm (1.63 in.)

Focus: Automatic or manual (built in motor)

Image Frequency: 50 Hz (100/200 Hz with windowing)

IR Resolution: 640 × 480 pixels

Lens Identification: Automatic

Minimum Focus Distance: 0.50 m (1.64 ft.)

Spatial resolution (IFOV): 0.41 mrad

Thermal Sensitivity/NETD: < 0.05°C @ +30°C (86°F) / 50 mK

MEASUREMENT & ANALYSIS

Accuracy: ±2°C or ±2% of reading

Atmospheric transmission correction: Automatic, based on inputs for distance, atmospheric temperature and relative humidity

Camera size (L x W x H): 222 × 73 × 75 mm (8.7 × 2.9 × 3.0 in.)

Emissivity Correction: Variable from 0.01 to 1.0

External Optics & Windows Correction: Automatic, based on input of optics/window transmission and temperature

Measurement Corrections: Global object parameters

Object Temperature Range: -20 to +150°C +100 to +650°C +300 to +2000°C

Optics Transmission Correction: Automatic, based on signals from internal sensors

Reflected apparent temperature correction: Automatic, based on input of reflected temperature

GENERAL

Contents: Hard transport case or cardboard box, Thermal imaging camera with lens, Utility CD-ROM, Calibration certificate, Ethernet™ cable, USB cable (FLIR A615), Mains cable, Power cable (pig-tailed), Power supply, Printed Getting Started Guide, Printed Important Information Guide, User documentation CD-ROM, Warranty extension card or Registration card, 6-pole screw terminal (mounted on camera)